THERMA fire protection paint for metal constructions.
printable versionDesigned for increasing fire resistant limit of metal constructions. If subject to fire can more than into ten times increase its volume to produce non-combustion foam with low thermal conductivity.
TU 2316-020-47935838-2003 with change 1
Fire Safety Certificate SSPB.RU
Compliance Certificate GOST R
Sanitary Expertise
Application Manual
Quality Certificate
Parameter | Standard |
Appearance | Uniform white suspension, Shade is not specified |
Cover Appearance | White cover with characteristic salient inclusion |
Mass share of non-volatile substances, % | 50 - 70 |
Density, g/cm³ | 1.2 - 1.4 |
Film adhesion, not more than, points | 1 |
APPLICATION METHOD
Before applying the paint prime the metal surface with GF-021 anti-corrosion first coat. THERMA paint is supplied as one ready to use component. Before application mix carefully.
Apply the paint with the use of an airless sprinkler or by hand (with a brush or roll) until the dry layer has necessary thickness.
The second layer can only be applied when the first one has completely dried and after not less than 6 hours.
Fire resistance limits, fire resistance efficiency groups | Required amount | Dry layer thickness, mm |
45 min (group 4) | 1.7 | 1.20 |
60 min (group 3) | 3.0 | 2.05 |
90 min (group 3) | 3.5 | 2.30 |
45 min with alkyd-enamel cover | 1.7 | 1.55 |
TRANSPORTATION AND STORAGE REQUIREMENTS
The paint is not hazardous and can be transported by any kind of covered vehicle according the rules for the particular vehicle.
Keep the paint in a tightly closed non-metal container in a dry closed room at temperatures from +5 to +35ºC with relative humidity up to 80%.
WARRANTED PERIOD
Warranted period for the prepared composition storage is 12 months since manufacturing date. The term of service inside a building in a cover system consisting of two layers of THERMA applied on a surface previously covered with two layers of GF-021 first coat with atmosphere resistant cover is not less than 15 years.
